Customers compare 902B to these similar products
Products Featured in this Video
Hi there, trailer owners. Today, we're going to be taking a look at Convert-A-Ball's convertibles interchangeable ball sets. These sets are available in either a two or three-ball set, with either a nickel or stainless finish. We're showing off the nickel today. They're also available with either a one or three-quarter-inch shank, and either a regular or an extended length. The one you'll see here… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt Slim Adjustable 2-Ball Channel Mount #C46KR that you referenced has two hitch pin holes that are one inch apart so the first pin hole has a distance of 10 inches from the ball center to the hitch pin and the other is 11 inches.
view full answer...We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model #100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator #CAM59005, which is a direct replacement for the regulator on your…
view full answer...I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…
view full answer...The Air Lift AirLift 1000 Air Helper Springs for Coil Springs will work in the exact manner you want; improving the ride and how your 2014 Ram 1500 handles when you are towing. These air springs will reduce the strain on your Ram's suspension and…
view full answer...At most the tongue weight of a trailer would cause about 1/2 inch to 1 inch of sag at the ball mount (give or take a little and different for every vehicle). But on a 2016 Ford F-250 the suspension is potentially beefy enough to limit the sag to even…
view full answer...The best places to look for capacity information for your 2018 BMW X5 are the owner's manual in the towing section and the sticker in the driver's side door jamb that also lists the tire pressure. Normally I would look these things up myself…
view full answer...I made a picture showing 3 important measurements on the Draw-Tite adjustable ball mount #7390. The distance from hitch pin hole center to ball hole center is 11-3/4 inches. If the extra 2 inches is needed in a ball mount then of course it would be…
view full answer...The tongue weight of a trailer depends on the size of the trailer and how it is loaded. Typically, the tongue weight is 10 to 15 percent of the weight of the trailer in its fully loaded ready-to-tow condition. You can use a tongue weight scale like…
view full answer...While the Edge Pulsar V3 L5P Inline Tuner with Insight CTS3 Monitor #EP54KR is not designed to void any factory warranty since it connects to the factory PCM without any modification to the vehicle hardware. It does reluctantly come down to GM if…
view full answer...We have the cotter pin part #165649 which would work great with the Convert-A-Ball Interchangeable Ball Set #900B. This pin is a standard cotter pin like what the ball set uses.
view full answer...The total length of the shank on the Convert a Ball Interchangeable Ball part #105TB is 3-1/2 inches and the threaded portion is 3 inches so the unthreaded portion is 1-1/4 inch at the base of the flange and then 1/2 inch below the threads.
view full answer...A chrome finish ball #C40036 is going to look good but it will not be corrosion resistant. A ball with a machine finish like #C40087 , is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate…
view full answer...